Hi all,

I installed the MCP4725 on Prototype PICtail Plus Daughter Board and install it to Explorer16 with Pic32.
connected the module to I2C1 which are pins RA14 and RA15.

I'm not familiar with the I2C protocol and I would like to ask if some one can send me a program which send out a simple sinwave so I will have a reference to start with.

I notice that there is a header file which call I2C.h but i couldn't do with it much.

thanks.

Dror

 

here is a link to a northwestern wiki that explains how to link two pic32 together over a i2c connection

http://hades.mech.northwestern.edu/index.php/PIC32MX:_I2C_Communication_between_PIC32s