I have built a weather station in the attic, works great displays seven segment four digits,in temp, windspeed, airpressure.
So i want to make another to display the same, do i
1, just make another pcb, chip etc.?
2, can i add a wireless transmit/reciever and send the data to the additional displays that will also use the same pic.?
3, run a cable from attic to second displays and use I2c, serial, usb, or other data transfer method.?
4, use a diferent pic?
datasheet
So i want to make another to display the same, do i
1, just make another pcb, chip etc.?
2, can i add a wireless transmit/reciever and send the data to the additional displays that will also use the same pic.?
3, run a cable from attic to second displays and use I2c, serial, usb, or other data transfer method.?
4, use a diferent pic?
datasheet
Last edited: