I have a Peavey amp, actually I have a pile of them, that's not outputting any power (output terminals and LED aren't on). I'll say it now, I can't take any pictures of it due to the fact it's at work and no pic's allowed there so I'll try and explain it as best as possible. I've tested most of the transistors and they seem to be fine and none of the caps are blown. A lot of the resistors seem to be measuring higher than what they're supposed to be (eg. .33ohm res. is measuring .7ohms), could all those resistors add up and be blocking too much of the voltage? Any help is appreciated and I'll answer questions with what I know.