Wondering what specs/calculations I need to do to determine how many mosfets in a parallel a mosfet driver is capable of running. Application is for -48VDC at 200+ amps (if possible)
I'll be using this driver http://cdn.vicorpower.com/documents/datasheets/Picor/ds_pi2003.pdf
and possibly this mosfet http://www.irf.com/product-info/datasheets/data/irfp4468pbf.pdf
actually probably this design but for higher power http://cdn.vicorpower.com/documents/application_notes/an_dualhighloworing.pdf
I'll be using this driver http://cdn.vicorpower.com/documents/datasheets/Picor/ds_pi2003.pdf
and possibly this mosfet http://www.irf.com/product-info/datasheets/data/irfp4468pbf.pdf
actually probably this design but for higher power http://cdn.vicorpower.com/documents/application_notes/an_dualhighloworing.pdf