1. I have connected an push-pull opamp only VDD & VSS to 15V power source which is some inches away from IC.
2. Without decoupling cap current was 40mA & with decoupling cap curent reduces to 5mA. What's reason behind this.
3. This 5mA current consmption increases if I touch the opamp with my finger only casing not the pins & again come back normal after that?
2. Without decoupling cap current was 40mA & with decoupling cap curent reduces to 5mA. What's reason behind this.
3. This 5mA current consmption increases if I touch the opamp with my finger only casing not the pins & again come back normal after that?