Op Amps

wayneh

Joined Sep 9, 2010
17,496
It looks to me like the first 3 bullets on the data sheet are what I would focus on:

Single-supply operation: 4.5 V to 16.5 V
Upper/lower buffers swing to VDD/GND (rail to rail)
Continuous output current: 35 mA

I think the 35mA output is not really required but it shouldn't be hard to just include that as a spec.

You don't care much about speed - this is not an AC application.
 
Last edited:

Thread Starter

sirch2

Joined Jan 21, 2013
1,037
wayneh - thanks

bertus - thanks and well spotted on the op amp, I must look at these things more closely. That's also a very interesting web page.
 
Top