op amp problem - backwards battery?

Audioguru

Joined Dec 20, 2007
11,248
The opamp does not have a power supply so it will do nothing.
If it has a plus and minus 10V or more power supply with the 0V of it connected to the circuit's ground then its output will be +7.2V.
 

Thread Starter

spicy_tofu

Joined Oct 17, 2012
3
I think for this circuit it would be zero like you said. It doesn't say anything about ground on the assignment, so im assuming its just earth ground. thanks for your help!
 

MrChips

Joined Oct 2, 2009
35,146
One can assume that the 741 is powered with -15V and +15V.

The battery is not backwards. It presents -8V input.
Calculate the voltage gain of the inverting amplifier circuit and you should be able to determine the output voltage.
 

catfibres

Joined Oct 17, 2012
7
Indeed, unless it is a "trick question" problem (no power supply for op amp), then a +/-15 volt supply may be assumed. In that case, it is a simple inverting amplifier with an input of -8V and a gain of -0.9, thus the output of +7.2V.
 
Top