Omron C500F Interfacing Problem

Discussion in 'Programmer's Corner' started by pandian, Sep 5, 2013.

  1. pandian

    Thread Starter Active Member

    Sep 27, 2009
    Hi Gurus,
    Good day.

    I need to download and modify a program from PLC c500F.
    I only have Hostlink LK201.
    Is there any way to modify or do something to establish comms between c500F and CX-Programmer?
    Please help.
    Thanks a million in advance.
  2. panic mode

    AAC Fanatic!

    Oct 10, 2011
    Geeeeezzzz... C500F platform was obsolete for years. it is a unit from time when hand held programmers were popular and floppy discs were considered large data storage. over millennia Omron changed software few times (completely), current crop is CX-Programmer (part of CX-One suite) and you want to program a true fossil with current software? if you ask me, do yourself a favor and ask this at a nice PLC forum such as, there is a dedicated and very active Omron section with plenty of very knowledgeable people. if there is a place to ask something like this, that would be it.
    pandian likes this.
  3. pandian

    Thread Starter Active Member

    Sep 27, 2009
    thank you Panic Mode
    that gives me a broad picture