Hey all,
I am working on a project that tells a fan to turn on for different periods of time according to how a rotary switch is set. Attached is the Eagle CADsoft file for it. It's a first pass at the schematic, and you'll probably see something I need to change to get it to work. I am using a pic16f84 chip to run the thing, and the resistor you see on the schematic represents the fan. I hope I got it right, but if not, your feedback would be greatly appreciated. Thanks in advance!
p.s. I just realized I left off a switch to turn the thing on and off, so I'll be including that for my next go around.
I am working on a project that tells a fan to turn on for different periods of time according to how a rotary switch is set. Attached is the Eagle CADsoft file for it. It's a first pass at the schematic, and you'll probably see something I need to change to get it to work. I am using a pic16f84 chip to run the thing, and the resistor you see on the schematic represents the fan. I hope I got it right, but if not, your feedback would be greatly appreciated. Thanks in advance!
p.s. I just realized I left off a switch to turn the thing on and off, so I'll be including that for my next go around.
Attachments
-
65.3 KB Views: 24