hello, i am pre-planning my project before i build it and i have an issue please be patient with me im new to electronics. I would love your help but please keep it simple for me. I uploaded a picture of my workings out i would like advice or improvement, if you are interested what i am building its a remote control bb gun turret (TOY NOT DANGEROUS) with 4 axis analogue joystick, lasers, pumps and switch to control all these with a small air-compressor with a solenoid gas valve (no problem with this switch).
so my issue is with a set of 3 switches (for my controller);
1. 3 position toggle switch ON/OFF/ON 3 pins (to switch between a momentary 2 pins switch and a toggle 2 pins switch)
2. 2 position toggle switch ON/OFF 2 pins
3. momentary switch 2 pins
I would simply like to know if my workings out will work? Any advice or help or suggestions will be greatly appreciated, and thank you in advance for taking time from you day to help
so my issue is with a set of 3 switches (for my controller);
1. 3 position toggle switch ON/OFF/ON 3 pins (to switch between a momentary 2 pins switch and a toggle 2 pins switch)
2. 2 position toggle switch ON/OFF 2 pins
3. momentary switch 2 pins
I would simply like to know if my workings out will work? Any advice or help or suggestions will be greatly appreciated, and thank you in advance for taking time from you day to help
Attachments
-
116.4 KB Views: 22