In the circuit below. I already made a voltage divider to supply 6V to pin 14, instead of the 12-13.8V supply. All other 12v connections remain the same as the schematic. I also replaced the 1k resistor from the collector of Q2 with a 2.2K. I left the 680K as is, but thinking I should raise that to 1.2M. Any ideas? It works, but not right because the resistor values are not correct. I do have 6V at pin 14 when the circuit is connected and running. I used a 2n3904 for Q2, a 2n5961 for Q1, and a TIP 120 for Q3
Thanks.
Thanks.