Hi there,

By any chance anyone knows the brand of the orange three pin rotatory switch at the side. It's SIEBIER or something. Need help finding the name of it.

 

Could the name be Siemens?? They make lots of industrial electrical stuff. Probably if you dismount that switch assembly you will even find a model number.

 

Maybe Schurter.

 

Made by ENEC switch manuf?
Max.

 

Once again, if you remove the assembly from the panel it will be possible to get a good view of the text molded onto the housing. the view we have is poor in that there are reflections and obstructions. Do you need to get repair parts, or just more of the same product?
OK, the switch that we see behind it may be a different part, BUT it looks like the same brand. Thus looking at it can reveal something.
What sort of piece of equipment is this, anyway??

 

Made by ENEC switch manuf?
Max.

ENEC is a European quality mark. ENEC 5 means the part was approved by DEKKRA in Holland http://www.enec.com
Seems the switch is a Serie B , to differentiate from serie A,C etc. The T150 mark may give a clue

 

Is the goal to locate a replacement for a failed part? Or is there some other purpose? for that matter, I have been assuming that the part in question is the one with the two exposed terminals. That may be the same brand as the panel mounted switch next to it. In addition, there may be a more legible brand mark on the other side. While the photo is fairly clear, it leaves a lot not shown. Also, knowing the country of origin of that piece of equipment can help suggest possible brands. There is a lot of knowledge and insight available in this forum but not much in the line of mind reading. We all need background to be able to deliver the most useful answers. That applies to most of the posts.