Hi all,
I am planing to develop a portable device using Raspberry Pi 3. Since, it is a portable device, I need to power the Pi-3 using batteries (18650 or Lipo batteries). My issue here is, I am unable to find a proper circuit diagram which will output 5V 3 to 4A of current, because you need minimum of 2.5A to operate the raspberry pi3.
I tried many power bank circuits which is available on Ali-Express and eBay. Also tried other modules such as buck/boost converter, Step-up converter's. But none of those modules were able to deliver the required output for the raspberry pi, although the ratings of these modules appeared to be 3 to 4 amps.
Can someone please guide me through or find me a proper solution for this issue.
Thanks in advance.
Raiz
I am planing to develop a portable device using Raspberry Pi 3. Since, it is a portable device, I need to power the Pi-3 using batteries (18650 or Lipo batteries). My issue here is, I am unable to find a proper circuit diagram which will output 5V 3 to 4A of current, because you need minimum of 2.5A to operate the raspberry pi3.
I tried many power bank circuits which is available on Ali-Express and eBay. Also tried other modules such as buck/boost converter, Step-up converter's. But none of those modules were able to deliver the required output for the raspberry pi, although the ratings of these modules appeared to be 3 to 4 amps.
Can someone please guide me through or find me a proper solution for this issue.
Thanks in advance.
Raiz