Does anyone have a reliable, working, good quality circuit schematic of music sync'd Led's? I need 2 banks of 12V Led's to flash in sync with music. that's pretty much it...
One other thing, if this is automotive it will violate our TOS (Terms of Service). I did a quick back ground check, you have another thread for pulsing headlights that was closed. I may not particularly like the automotive restrictions, but I will enforce them.
I understand all the stuff on there, simple stuff but the U1 etc it is a triangle, and there is no parts list? how am i suppose to know what to buy?
Also, yes this is to put on a car, and the car is not road registered it is for a paddock. So the TOS or watever and road regulations has nothing to do with these electronics
I am sorry, but that is not how it works. If it is for a automobile (road worthy or not) then it is not allowed here. I would suggest using another site for this line of inquiry, such as ElectroTech, a site similar to this one but without the automotive rules. It tends to be rough on beginners.
If you really read through the tutorial I wrote I suspect you will find all your questions are answered, but when learning electronics (which is what you are trying to do) there is no substitute for reading. I suggest buying a protoboard and start learning how to wire circuits, or buy the appropriate kit from Velleman.
So now I need to close this thread. I'm going to attach the stock response on this because it also has some other automotive thread references.
Good luck.
Quote:
6. Restricted topics. The following topics are regularly raised however are considered “off-topic” at all times and will results in Your thread being closed without question:
Any kind of over-unity devices and systems
Automotive modifications
Devices designed to electrocute or shock another person