well guys i am trying to simulate a voltage comparator in multisim using a LM324N. now i am pretty sure i connected everythin correctyl in multisim but the outputs i am getting are really crazy. so i am posting pics of my circuit diagram in multisim and the outputs that i am getting.
My Vref for the Comparator comes from the POT and , and the input voltage is the AC signal generator. my output voltages are not making sense
Channel A: Vref
Channel B: Vin - but that is not the amplitude of my signal, it should be 1Vp
Channel C: Vout - which does not make sense to me at all.
So any suggestions where the problem might be. thanx for taking the time to read this.
My Vref for the Comparator comes from the POT and , and the input voltage is the AC signal generator. my output voltages are not making sense
Channel A: Vref
Channel B: Vin - but that is not the amplitude of my signal, it should be 1Vp
Channel C: Vout - which does not make sense to me at all.
So any suggestions where the problem might be. thanx for taking the time to read this.
Attachments
-
190.7 KB Views: 161
-
161 KB Views: 82