I have been asking and getting tons of help with a project I am workiong on. I have now started receiving components in the mail and I just quickly realized the flexibility/safety of using my solderless protoboard is about to end. I plan to use standard perfboard to make my circuits that I will use in my project. I know I will have many more questions, but in addition to any basic suggestions, I have a few specific to my project.
My project will involve using a quad 339 setup with 4 separate LDR's. When any of the LDR's go "dark", I will have a 3 digit counter setup (7 seg LED's) to count the number of times this happens. I know I talking in generalities, but I have a few open threads where specific help has been/is being given.
My questions involve the best way to separate the different components. My initial thinking is to keep all of the circuit(s) together with the only components being (wired) farther away being the 4 LDR's and the 3 digit, 7 seg LED display.
I apologize if my questions are too vague for you to offer an educated suggestion. I will try to sketch my "big picture" plan to help clear things up. I have to step out for awhile, but I will make sure to clarify as soon as possible.
My project will involve using a quad 339 setup with 4 separate LDR's. When any of the LDR's go "dark", I will have a 3 digit counter setup (7 seg LED's) to count the number of times this happens. I know I talking in generalities, but I have a few open threads where specific help has been/is being given.
My questions involve the best way to separate the different components. My initial thinking is to keep all of the circuit(s) together with the only components being (wired) farther away being the 4 LDR's and the 3 digit, 7 seg LED display.
I apologize if my questions are too vague for you to offer an educated suggestion. I will try to sketch my "big picture" plan to help clear things up. I have to step out for awhile, but I will make sure to clarify as soon as possible.
Last edited: