i did my last try on the uni lab it worked ok and peaks didn't exceed 12v volts for 140v supply untill one mosfet fail this was new where the gate and the source are short circuit which result in high current is drawn from the mosfet driver whcich burn it
i now don't know the reason for this failures since the max spikes was around 150v only
edit: the square wave are ok and only small value of ringings occur less than 10v
i now don't know the reason for this failures since the max spikes was around 150v only
edit: the square wave are ok and only small value of ringings occur less than 10v
Last edited: