What microcontroller?How to program the Microcontroller, to interface with the 4x4 matrix keypad using only one port..
You have a large misconception about how these forums work. We expect the right questions first before you can get any answers.i expect the right replies.. thanks...
|Thread starter||Similar threads||Forum||Replies||Date|
|J||Where to start with Microcontroller Chips for PCB||General Electronics Chat||2|
|The Program stops running as sensors detects something||Microcontrollers||13|
|what are the safety/protection I will have to take when converting 0 to 240V to 0 to 1V , feeding to adc pin of microcontroller||Analog & Mixed-Signal Design||7|
|P||clarify if TL5551 is a microcontroller||General Electronics Chat||4|
|B||Implement footswitch to microcontroller I/O pin.||Microcontrollers||6|
|Where to start with Microcontroller Chips for PCB|
|The Program stops running as sensors detects something|
|what are the safety/protection I will have to take when converting 0 to 240V to 0 to 1V , feeding to adc pin of microcontroller|
|clarify if TL5551 is a microcontroller|
|Implement footswitch to microcontroller I/O pin.|
by Rushi Patel