Hi,
I am having problems with identiying two diodes D3 and D4 on this board.
The Controller MC-60 is from a Threadmill Proform 400CW.
The cuircuit board is the same as previous post.
A lizard crawled in an shorted them out, now I need to replace it.
They are burnt beyond recognition.
Your help to identify these components values would be greatly appreciated.
Wayne
Trinidad & Tobago
Caribbean
I am having problems with identiying two diodes D3 and D4 on this board.
The Controller MC-60 is from a Threadmill Proform 400CW.
The cuircuit board is the same as previous post.
A lizard crawled in an shorted them out, now I need to replace it.
They are burnt beyond recognition.
Your help to identify these components values would be greatly appreciated.
Wayne
Trinidad & Tobago
Caribbean