Hi everyone.
New to these forums, and read T&C + Rules, so hopefully I've put this thread in the right place.
Just needed some assistance with making a very basic delay circuit.
I have looked at a few basic 555/Schmitt trigger circuits but can't seem to find one for this exact application.
I basically have a 12 volt supply which is going from low to high state (0v to 12v). I need to create a very basic circuit which delays this action by a short amount of time (between 0.5 and 2 seconds, although implementation of a variable resistor so that adjustments could be made would be ideal.
Simply put, I need a small circuit which has an input of 0V, which then becomes 12V, and I need the output to be identical, however moving from 0V to 12V is slightly delayed.
I thank you in advance for taking the time to read this
New to these forums, and read T&C + Rules, so hopefully I've put this thread in the right place.
Just needed some assistance with making a very basic delay circuit.
I have looked at a few basic 555/Schmitt trigger circuits but can't seem to find one for this exact application.
I basically have a 12 volt supply which is going from low to high state (0v to 12v). I need to create a very basic circuit which delays this action by a short amount of time (between 0.5 and 2 seconds, although implementation of a variable resistor so that adjustments could be made would be ideal.
Simply put, I need a small circuit which has an input of 0V, which then becomes 12V, and I need the output to be identical, however moving from 0V to 12V is slightly delayed.
I thank you in advance for taking the time to read this