View attachment 235930
It supposedly represents the current-controlled current source in the circuit
I've done the following but the output is still incorrect.. My apologies, I've only been using this program for 2 days on my own.No! If you read carefully is is a voltage dependent current source with a gain of 3.
I would use the behavioral current source "B" if I were you.
It worked, thank you so much!Rookie mistake.
There is no connection at the right end of R3.
In LTspice there is only a connection between wires if there is a square dot at their junction.
You have a connection in your previous post of the schematic.
If you have any further questions, post the .asc file of your circuit also.