Hi,

I am trying to get that circuit to work but LTSpice takes a lot of time to do nothing.

 

Put a ground (0V) reference in somewhere.

 

Ah! Shhhhh------tttttt.

)

 

Hi ,

How do I get my OP point working?

See ASC file OP.

---------

PS: How do I get advise when there is replies to my posts?

 

hi j4,
Which parameter/s on that circuit are you interested in plotting.?
E

 

DC op wich gives a text box of the various voltages and currents.

Here is the last shema I did.

 

How do I get my OP point working?

Go to Simulate/Edit Sim Cmd, then select DC Op pnt, then drop the resulting .op onto the schematic.

 

I did that but the text window does not open.

 

Normally you use the .op command for fixed DC analysis only, after running the Sim, move the cursor over the circuit Nodes and read the values on the lower Status bar..

You are stepping your params so there will be no steady state values.

 

Ok. That's it.

 

Ok. That's it.

If you ever want to view the data, Right click on the PLOT window and from the drop down menu , select View/ Spice Error log..

This Spice Log does a number of jobs.