I am looking for a video card with BNC connector (sending signal out) that I can connect to the Sony Thermal printer (UP-990AD) and my computer through the PCI bus.
The I/O of the printer is as follows:
1. Input: BNC type; EIA or CCIR composite video signals 1.0 V p-p, 75 ohms/high impedance (EIA/CCIR automatically discriminated)
2. Output: BNC type; EIA or CCIR composite video signals 1.0 V p-p, 75 ohms loop-through/EE switchable
I will be sending output frames to the printer. Is there anything like this exist?
Thanks
Faisal
The I/O of the printer is as follows:
1. Input: BNC type; EIA or CCIR composite video signals 1.0 V p-p, 75 ohms/high impedance (EIA/CCIR automatically discriminated)
2. Output: BNC type; EIA or CCIR composite video signals 1.0 V p-p, 75 ohms loop-through/EE switchable
I will be sending output frames to the printer. Is there anything like this exist?
Thanks
Faisal