hi I am learning electronics, and I have been working on a project. i went to a local company to have a pcb designed, and they wanted to charge me what seemed like a fortune. I dont know if Im in the right forum, but I am looking for a freelance pcb designer, to help me out (paid obviously).
Basically My project started with the Arduino Mega2560, I started trying to do it myself by modfiying the open source eagle files for it, however I got myself into a bit of a pickle!
To give you some details of what the design involves:
25 button matrix,
9 other buttons,
30 leds
1 rotary encoder
4 potentiometers
2 16 channel multiplexers reading 25 piezo transducers
1 atmega2560
1 atmega16U2
1 USB socket
2 1/4 inch female jack sockets
the required resistors diodes and capacitors to manage the above.
Alot of the circuit can be taken straight from the open source eagle file for the Arduino mega2560, however instead of going to female header pins, i want everything wired up properly.
There is also obvious layout consideration required.
I look forward to hearing from anyone interested - if you are, pm me and I'll give you my email address
Thanks
Alex
Basically My project started with the Arduino Mega2560, I started trying to do it myself by modfiying the open source eagle files for it, however I got myself into a bit of a pickle!
To give you some details of what the design involves:
25 button matrix,
9 other buttons,
30 leds
1 rotary encoder
4 potentiometers
2 16 channel multiplexers reading 25 piezo transducers
1 atmega2560
1 atmega16U2
1 USB socket
2 1/4 inch female jack sockets
the required resistors diodes and capacitors to manage the above.
Alot of the circuit can be taken straight from the open source eagle file for the Arduino mega2560, however instead of going to female header pins, i want everything wired up properly.
There is also obvious layout consideration required.
I look forward to hearing from anyone interested - if you are, pm me and I'll give you my email address
Thanks
Alex