I have a single phase 115/230 volt leroy-somers motor without wiring diagram. It has european style wiring block. I need to know if it is configured for 115 or 230v at this time.
thanks for the insight. This is mounted to a vacuum pump on a bottling line. Most of the machine on the line runs 3 phase 208V. All of the Leroy-Somers single phase info I got was strictly for 230V as that is all they sell in Europe. so I have a motor with US voltages but a European style terminal block. I guess I'll try the 115V option first. And yes the blue crimps were the existing field connections so there were only 2 line feeds.
blue wire is U1, white wire is V2 and black wire is V1
Orange is Z2, Red is U2 and brown is Z1. I think that this must be a nonstandard connection to the terminal block since Z2, U2 and V2 are all jumpered(as in 110V) but the line connections are at U1 and Z1(as in 220V).