Led Modules under car pulse

Discussion in 'The Projects Forum' started by Laviniu9, Dec 27, 2010.

Thread Status:
Not open for further replies.
  1. Laviniu9

    Thread Starter New Member

    Dec 27, 2010
    hellow to all of you:d i`m new here..i`ll need some help with my ideea..

    I want to make a "neon" instalation under my car ( like this http://www.illumin8ors.com/FnaH_golf.jpg ) using 11 led modules(3 leds on a board with a resistor..like this http://www.zexstar.com/product_info...uperflux-Verzi--9lm--90--176---92mm--12V.html ) wired up at the car cigarette lightner...i want to make them pulse/dance by the music that plays from the radio unit..(using 2 wires from one of the speakers)..

    At this point i have one problem.. i want to make the "neon" switch with 3 positions : OFF ;ON-allways ; ON-"dancing"

    As a conclusion: i need a schematic drawing of how should i wire up all the things;a list of the components

    I would be very grateful if you`re going to help me.

    Srry for my bad english.

    P.S. I`m a total beginer on electronics so please explain me every detail in part... thx a lot
  2. bertus


    Apr 5, 2008
Thread Status:
Not open for further replies.