All About Circuits

Latching on off momentary push switch

roadey_carl

Thread Starter

roadey_carl

Joined Jun 5, 2009
137
Hello everybody,

I been working on a project for a latching on off momentary push switch for a couple of days now. After searching round my IC part box I found quite a few MC14013BCP Dual D-Type Flip Flop.

I had a schematic for a 4027 jk flip flop so I used this as a base for me to come up with something similar, but using the 14013 chip.

This is what I came up with. It works a treat, just thought I would show you all incase anyone needed a circuit like this ( even though there are tons out there)

See what you think!



http://imageshack.us/photo/my-images/69/mc14013bcp.jpg/

http://imageshack.us/photo/my-images/94/dscf0120jp.jpg/

http://imageshack.us/photo/my-images/267/dscf0131x.jpg/
 
Last edited:
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
P One momentary push button and 4 basic relay to turn on and off a light bulb. General Electronics Chat 23
garudaone How to generate a short pulse(5~50ms) when a switch is on Digital Design 38
Walter2k Latching dual momentary switchs with a single 555 Timer. Latching +Signal with Delay +Signal General Electronics Chat 14
D Momentary to Latching Switch Converter Power Electronics 0
C Oscillating cd40106 and using momentary switches for latching on/off state and capacitance Digital Design 16
Similar threads
One momentary push button and 4 basic relay to turn on and off a light bulb.
How to generate a short pulse(5~50ms) when a switch is on
Latching dual momentary switchs with a single 555 Timer. Latching +Signal with Delay +Signal
Momentary to Latching Switch Converter
Oscillating cd40106 and using momentary switches for latching on/off state and capacitance

You May Also Like

Top