Large pin board supplier?

Thread Starter

bowlingo

Joined Jun 29, 2011
162
Hi all,

I am looking for 2 x 300mm X 250mm pinboards (dot matrix board) for mounting loads of relays..ive had a look around but cant find anay big enough..I want to be able to put one pinboard on top of another with a series of relays below and above (I have plenty of depth in big adaptable box)

I need the type where each hole is seperate rather than the ones with copper strips on..not sure of the name

Ive looked on Maplin and RS but nothing big enough..

I am in the UK

Thanks
 

Thread Starter

bowlingo

Joined Jun 29, 2011
162
hi all,

I have found these ones..

http://www.esr.co.uk/electronics/products/frame_pcb.htm

The normal single sided copper clad boards go up to 12" x 8" (304mm x 203mm)

Im after 12" x 12" (304mm x 304mm can cut it down if need be)

Down the page they have 12" x 12" of which are 12 x 12"

Single Sided Paper Photoresist PCB laminate

There are no pin hole sizes though..

Can anyone explain to me what the Paper Photoresist PCB laminates are please

Thanks
 

Thread Starter

bowlingo

Joined Jun 29, 2011
162
Anyone any ideas on this...desperate to revamp a project...not enough space in adaptable box but lots of depth so planning on putting 2 x 300mm x 300mm pad per hole boards on top of each other and packing with relays...

Had a look all over the place but cant find one 300mm x 300mm (12" x 12")
 
Top