Facebook
Google
GitHub
Linkedin
Laddr logic S-R Latch
- Thread starter hp1729
- Start date
MaxHeadRoom
- Joined Jul 18, 2013
- 30,664
Doesn't seem to make sense? Labels don't seem correct/consistent?
Looks like there should be AND contacts in there?
Max.
Looks like there should be AND contacts in there?
Max.
Errors are very possible.
Intended operation …
If the “S” (Set) switch is pressed relay Joan is pulled. Contact Joan-not over on the Reset side is open. If “R” (Reset) is not pressed relay Joe is not activated. Contact Joe-Not over on the Set side is closed, holding the set Relay pulled.
Set switch can be released.
When the “R” (Reset) switch is pressed relay Joe is pulled. Contact Joe-not over on the Set side is open. If “S” (Set) is not pressed relay Joan is not activated. Contact Joan-Not over on the Reset side is closed, holding the Reset Relay pulled.
Reset switch can be released.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
Rigol PLA2216 logic probe | Test & Measurement | 5 | |
| Y | logic of phase plot slope in microstrip | PCB Layout , EDA & Simulations | 0 | |
| B | How to implement the Tactile switch Logic and the LEDS Both Functionalities | Digital Design | 5 | |
|
Fuzzy Logic | Automation, Robotics & Control | 95 | |
|
Logic D | Homework Help | 53 |
