JoyWarrior24GP32 - DIY USB controller

Thread Starter

Klipeti

Joined Nov 25, 2012
18
Hello!

First of all, English isn't my native language.
I'm planning to make an USB controller with JoyWarrior24GP32 chip. I have some questions, so I hope that someone with more experience with electronics can help me. Note: to be able to answer my questions, you will have to read the datasheet.

I have link to JoyWarrior24GP32 datasheet (it includes many JoyWarrior chips) and link to my circuit diagram (my questions are on it) below. I'm planning to use SNES controller case for my project.

Here's one thing that would be cool:
What about making it wireless USB controller? I have no experience about how wireless stuff works, all I know that two devices send, receive and decode signal between them. So maybe someone with more experience could give me instructions about how to make wireless USB device.

I hope that my questions are clear enough. Once again, English isn't my native language, so be nice.
I would be glad for feedback and suggestions.

Link to JoyWarrior24GP32 datasheet: http://www.codemercs.com/uploads/tx_sbdownloader/JoyWarrior24Datasheet.pdf
Link to my circuit diagram with questions: http://tinypic.com/view.php?pic=3486bfn&s=6
 

takao21203

Joined Apr 28, 2012
3,702
1. I don't see any language usage problems in your post.

2. The SNES controller pad has a 16bit shifting register. You can of course get rid of it, and wire the buttons manually, but this is a lot of hassle.
 

Thread Starter

Klipeti

Joined Nov 25, 2012
18
I don't plan to use SNES controller's own circuit at all. All I do is to get empty SNES controller case and build my own circuit in it.
 

Thread Starter

Klipeti

Joined Nov 25, 2012
18
Sorry for double post, I just want to make sure that you people read this. All I want that someone would read the datasheet and confirm my circuit diagram, answer the questions and give advice for me.
 
Top