I'm at odds why the JK to RS flip flop conversion is equivalent to the JK itself. Given the input combination R=S=1 (assuming active HIGH) the flip flop will toggle?
This should be forbidden.
This should be forbidden.
JK to RS Flip Flop Conversion
- Thread starter amilton542
- Start date
Forbidden? So the flip flop police will come and get you?
(Ignoring for the moment that the RS is not a clocked device) the state R=S=1 is undefined, meaning anything that happens, including a toggle, is acceptable behavior.
However, the RS is not a clocked device so how are you going to create one of of a JK device?
(Ignoring for the moment that the RS is not a clocked device) the state R=S=1 is undefined, meaning anything that happens, including a toggle, is acceptable behavior.
However, the RS is not a clocked device so how are you going to create one of of a JK device?
http://1.bp.blogspot.com/-n0gksET1K...qYbOzRMWKs/s1600/JK-FlipFlop_%284-NAND%29.PNG this is also a J-K flip flop, but it is not edge triggered but rather level triggered. So if clock is left high, then it acts as a normal flip flop.
Because the RS can be converted to a clocked device, with additional circuitry even edge triggered.
Having said that, I did find the JK to RS conversion on the web so I would imagine it was a futile read anyway.
Having said that, I did find the JK to RS conversion on the web so I would imagine it was a futile read anyway.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| M | Single LED flasher (not flip flop) | Analog & Mixed-Signal Design | 38 | |
| 4 | cd4013 flip flop outputs always on | Digital Design | 9 | |
| S | Flip flop conversion | Homework Help | 9 | |
| L | Conversion of 1 flip flop to another | Homework Help | 2 | |
| A | The logic behind flip-flop conversion | Homework Help | 6 |
