All About Circuits

Is the load impedance provided in the solution

P

Thread Starter

powersys

Joined Jan 10, 2006
5
Pls look at the Load Impedance calculation. The answer is given in the shaded (gray) box. Is the answer CORRECT? If YES, pls advise how to get it. The answer I got is ZL = 3.26 + j2.02.


My calculation:

ZL
= V1 / I
= 240 / (53.1 - j32.9)
= 3.26 + j2.02

Pls advise.

 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
esoulse How to find the Zeq (input impedance) of the matching network, and the load seen by the generator and the forward/reflected power Homework Help 4
A Is it possible for a pure reactive load (Z= jX) to be adapted to a line with characteristic impedance of 75 Ω? (RF circuit) General Electronics Chat 3
Nurahmed Omar Frequency Response of LC Filter has a Peak with an Impedance Load Homework Help 7
Lambo Av Voltage Magnitude, Phases, Current for Bus (Load Flow) Homework Help 0
Lambo Av Given 3 buses with line impedance, generators and loads provided, where must the protection circuit be allocated? Homework Help 0
Similar threads
How to find the Zeq (input impedance) of the matching network, and the load seen by the generator and the forward/reflected power
Is it possible for a pure reactive load (Z= jX) to be adapted to a line with characteristic impedance of 75 Ω? (RF circuit)
Frequency Response of LC Filter has a Peak with an Impedance Load
Voltage Magnitude, Phases, Current for Bus (Load Flow)
Given 3 buses with line impedance, generators and loads provided, where must the protection circuit be allocated?

You May Also Like

Top