Discussion in 'General Electronics Chat' started by jeffwong, Jul 25, 2009.

  1. jeffwong

    Thread Starter New Member

    Jul 19, 2009
    Im design a simple inverter, but dont know it function, the value was simple put and choose from other circuit. please give some advice!
    1) How you think about this circuit? Izit too simple?
    2) If i want to run a household equipment, like fan and light, izit ok?
    3) I need to simulate the circuit but this circuit contain PIC controller, how can i simulate it ? Using other component instead it for simulation part?
    4) This inverter will give a pure sine wave output 240Vac voltage?
    5)If anywrong, please help me to modify it.

  2. Wendy


    Mar 24, 2008
    It has a small chance of working, in the sense of providing AC power. Sine wave output, not too likely, those FETs will have to be powered in the digitial mode. Are you thinking PWM and generating a sine wave that way? There is a reason sine wave invertors cost more, they are more complex and much less efficient, as has been mentioned on your other threads. For simple household equipment like lights and fans, this is not important.

    Invertors are a bit more complex than people give them credit for, I think.
  3. Audioguru


    Dec 20, 2007
    Like I said on another website where the same question was posted 3 times:
    The transformer is connected wrong so the Mosfets do nothing.
    The turns ratio of the transformer is also wrong.
  4. beenthere

    Retired Moderator

    Apr 20, 2004
    If you need sine power, an alternator is a much better way to get it.