integration question

In the last installment, we built the hardware to control an AC waveform with a TRIAC as the first step in a DIY solder reflow oven. This tutorial continues the project by showing you how to set up the low-level hardware to measure temperature, read the zero-cross detector, drive the TRIAC, and print to the serial terminal using a USART.

This article discusses a technique in which frequency-domain subtraction is used to selectively suppress the noise components in an audio signal.

The Particle Photon is a powerful little board with the ability to easily connect objects to the internet. This series of articles will be enough to get you up and running with the Particle Photon.