Hi, I bought this hot air gun a few months ago and I really love the quality of everything, elegant texture, nice buttons and settings, works fantastic... everything was way better than expected, except one little detail: whenever you turn it off with its ON/OFF button, it goes full crazy max fan speed, making a lot of noise, for 30 seconds straight, to cool down the nozzle.
https://www.amazon.co.uk/Ginour-Temperature-Stainless-Accessories-Stripping/dp/B08DHYQS28
It's automatic and there's nothing you can do about it, and I find it very, very, very annoying because the extra 30s you have to bear that sound, the fact that is automatic and you can't disable it, and the loud sound it makes. Sometimes I am working at quiet hours, or when someone is sleeping, or at night, silently tinkering minding my own reparations, and then I need the heat gun and I just avoid it, trying to find an alternative in my workbench.
I find this feature interesting, but only as a manual thing, not a mandatory feature that once you've turned it on, "well, too late, expect the Apollo 11 launch". So, the point is, I want to add a switch, install one inside the frame so it looks something like this:
I'd like it as small as possible (basically to be able to fit it inside, as a large one won't fit at all), but of course it must withstand the maximum 2000W. I would put it somewhere in the handle, where there's no heat at all.
These ones would be fine but they are massive and won't fit:
These are perfect for its size, but the rating is for 750W:
EDIT: I hoped I had not have to point the obvious, but here we go, I am well aware that the gun does this to cool down the nozzle, indeed that's in the very first paragraph. I just want to let it rest without such an annoying noise.
https://www.amazon.co.uk/Ginour-Temperature-Stainless-Accessories-Stripping/dp/B08DHYQS28
It's automatic and there's nothing you can do about it, and I find it very, very, very annoying because the extra 30s you have to bear that sound, the fact that is automatic and you can't disable it, and the loud sound it makes. Sometimes I am working at quiet hours, or when someone is sleeping, or at night, silently tinkering minding my own reparations, and then I need the heat gun and I just avoid it, trying to find an alternative in my workbench.
I find this feature interesting, but only as a manual thing, not a mandatory feature that once you've turned it on, "well, too late, expect the Apollo 11 launch". So, the point is, I want to add a switch, install one inside the frame so it looks something like this:
I'd like it as small as possible (basically to be able to fit it inside, as a large one won't fit at all), but of course it must withstand the maximum 2000W. I would put it somewhere in the handle, where there's no heat at all.
These ones would be fine but they are massive and won't fit:
These are perfect for its size, but the rating is for 750W:
EDIT: I hoped I had not have to point the obvious, but here we go, I am well aware that the gun does this to cool down the nozzle, indeed that's in the very first paragraph. I just want to let it rest without such an annoying noise.
Last edited: