# I have made a flywheel with magnets attached and 4 power coils, not working out properly

#### BobTPH

Joined Jun 5, 2013
8,938
Sure, if you can point me to a datasheet.

#### ThePanMan

Joined Mar 13, 2020
793
Aside from your very first post (Post #1) you have commented 79 times. That's not counting post #1
Page 1) you commented 14 out of 20 posts
Page 2) 10/20
Page 3) 15/20
Page 4) 11/20
Page 5) 14/20
Page 6) 15/20
Page 7 starts with post # 121. 79 of all posts (80 if you count post #1) have been your posts. OK, I get it. You want to be heard. Well, we hear you. Like a clanging piece of iron dragging underneath a car, we hear you. I don't know how many people are in agreement with you but from what I'm seeing, first, you're doing most of the talking. Second, though people are trying to help you, you only want to hear what you want to hear. Like @Tonyr1084 said;
you are intent on building no matter what anyone else says. Go ahead and build it. It will no doubt turn out to be a great learning experience for you.

#### Maglatron

Joined Nov 3, 2023
154
Ok, understood, I will limit my posts

#### Maglatron

Joined Nov 3, 2023
154

#### Attachments

• 102.6 KB Views: 4

#### Maglatron

Joined Nov 3, 2023
154
so voltage across the resistor divided by resistor give current.
the voltage across the resistor squared, then divided by resistor to give power.
just clarifying

#### BobTPH

Joined Jun 5, 2013
8,938
so voltage across the resistor divided by resistor give current.
the voltage across the resistor squared, then divided by resistor to give power.
just clarifying
Yes.

Ohm’s law: V = I x R

So by simple algebra: V / R = I

Power is: P = V x I

So, substituting V / R for I (from above)

P = V x V / R or V^2 / R

#### Maglatron

Joined Nov 3, 2023
154
Yes.

Ohm’s law: V = I x R

So by simple algebra: V / R = I

Power is: P = V x I

So, substituting V / R for I (from above)

P = V x V / R or V^2 / R
many thanks

#### Maglatron

Joined Nov 3, 2023
154
Sure, if you can point me to a datasheet.

#### BobTPH

Joined Jun 5, 2013
8,938
Yes. Don’t pollute this thread with something new.

#### ThePanMan

Joined Mar 13, 2020
793
Ok, understood, I will limit my posts
You don't have to limit your posts to suit anyone here. I just noticed how many posts from you. Up to the point where I counted it was 80 out of 120 = 2/3.