i am getting the following simulation report in orcad capture CIS:
** Profile: "SCHEMATIC1-bias" [ C:\Program Files\OrcadLite\Capture\sagnik-SCHEMATIC1-bias.sim ]
**** CIRCUIT DESCRIPTION
******************************************************************************
**** 10/27/11 22:37:15 ************** PSpice Lite (Mar 2000) *****************
** Creating circuit file "sagnik-SCHEMATIC1-bias.sim.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS
*Libraries:
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Program Files\OrcadLite\PSpice\PSpice.ini file:
.lib "nom.lib"
*Analysis directives:
.TRAN 0 1000ns 0
.PROBE V(*) I(*) W(*) D(*) NOISE(*)
.INC ".\sagnik-SCHEMATIC1.net"
**** INCLUDING sagnik-SCHEMATIC1.net ****
* source SAGNIK
**** RESUMING sagnik-SCHEMATIC1-bias.sim.cir ****
.END
WARNING -- There are no devices in this circuit
please help me rectify the error
** Profile: "SCHEMATIC1-bias" [ C:\Program Files\OrcadLite\Capture\sagnik-SCHEMATIC1-bias.sim ]
**** CIRCUIT DESCRIPTION
******************************************************************************
**** 10/27/11 22:37:15 ************** PSpice Lite (Mar 2000) *****************
** Creating circuit file "sagnik-SCHEMATIC1-bias.sim.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS
*Libraries:
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Program Files\OrcadLite\PSpice\PSpice.ini file:
.lib "nom.lib"
*Analysis directives:
.TRAN 0 1000ns 0
.PROBE V(*) I(*) W(*) D(*) NOISE(*)
.INC ".\sagnik-SCHEMATIC1.net"
**** INCLUDING sagnik-SCHEMATIC1.net ****
* source SAGNIK
**** RESUMING sagnik-SCHEMATIC1-bias.sim.cir ****
.END
WARNING -- There are no devices in this circuit
please help me rectify the error