i am getting the following simulation report in orcad capture CIS:



** Profile: "SCHEMATIC1-bias" [ C:\Program Files\OrcadLite\Capture\sagnik-SCHEMATIC1-bias.sim ]


**** CIRCUIT DESCRIPTION


******************************************************************************


**** 10/27/11 22:37:15 ************** PSpice Lite (Mar 2000) *****************


** Creating circuit file "sagnik-SCHEMATIC1-bias.sim.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS

*Libraries:
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Program Files\OrcadLite\PSpice\PSpice.ini file:
.lib "nom.lib"

*Analysis directives:
.TRAN 0 1000ns 0
.PROBE V(*) I(*) W(*) D(*) NOISE(*)
.INC ".\sagnik-SCHEMATIC1.net"



**** INCLUDING sagnik-SCHEMATIC1.net ****
* source SAGNIK

**** RESUMING sagnik-SCHEMATIC1-bias.sim.cir ****
.END

WARNING -- There are no devices in this circuit

please help me rectify the error

 

There are apparently no devices in sagnik-SCHEMATIC1.net. Post the schematic.