I am a beginner and if someone could help me

Thread Starter

Emralu

Joined Feb 25, 2010
3
Good morning.I am a beginner and I have no experience in electronics.My project is to realise a frequency programmable divider on 4 bits using HCT circuits.If someone could help me to find or to realise the schematic for this would be great.I've tried to creat a block diagram and this contains:an oscillator(tact generator with 2 jumpers,a switch and using a standard Trigger Schmitt),a 4 bits counter(74HCT193;at the outputs of the counter there are 4 leds),a bistable(i think a D or a T one),4 switches,4 buffers,4 leds and the power supply.
 

Thread Starter

Emralu

Joined Feb 25, 2010
3
Is a project for one of my classes.And that's all the project coordinator told me about.I'll try to post the scheme but first i have to draw it in Circuit Maker or Protel.
 
Top