Hello every one on this board .
I have found an old stepper motor from SHINANO KENSHI (now Plextor ) .
I want to know the wiring configuration if possible for testing this motor and see if its working .
Here is the informations marked on the motor :
STH-57D353 ( or 853) not very sure .
1.8 Deg/step
24V/0.3A
31x30 ???
There is 6 wires coming from it , black, red , green ,white ,white/green , white/red .
I have found an old stepper motor from SHINANO KENSHI (now Plextor ) .
I want to know the wiring configuration if possible for testing this motor and see if its working .
Here is the informations marked on the motor :
STH-57D353 ( or 853) not very sure .
1.8 Deg/step
24V/0.3A
31x30 ???
There is 6 wires coming from it , black, red , green ,white ,white/green , white/red .