Hello, I have recently found real joy in making very simple analog electronic audio circuits; and it's getting more complex very raplidly... My father gave me this old Powerstat a while ago and I was thinking It could make a dual power supply with it.
As for now I'm working on simple projects like stepped tone generators, lfo´s and for my next project I want to make a variable bandpass filter, so I'm in the 5V to 15V range.
I would specifficaly need +5/-5V, +9/-9V, +12/-12V and +15/-15V, don't know if I would need certain config for each value or if I can use one config for all values and adjust voltage by the main powerstat knob (that would be ideal).
Te Powerstat specs are the following:
InV: 120
OutV: 0 - 140
A. 10
KVA: 1.4
Freq: 50/60
I´m attaching the powerstat photos and specs plate so you can appreciate it.
I came across this image from the Make:Analog Sinthsizers book from MFOS´s Ray Wilson
I really don't know if this setup would work, I'd really appreciate any help.
Thanks in advance, Happy Hollydays and/or Christmass
David
As for now I'm working on simple projects like stepped tone generators, lfo´s and for my next project I want to make a variable bandpass filter, so I'm in the 5V to 15V range.
I would specifficaly need +5/-5V, +9/-9V, +12/-12V and +15/-15V, don't know if I would need certain config for each value or if I can use one config for all values and adjust voltage by the main powerstat knob (that would be ideal).
Te Powerstat specs are the following:
InV: 120
OutV: 0 - 140
A. 10
KVA: 1.4
Freq: 50/60
I´m attaching the powerstat photos and specs plate so you can appreciate it.
I came across this image from the Make:Analog Sinthsizers book from MFOS´s Ray Wilson
I really don't know if this setup would work, I'd really appreciate any help.
Thanks in advance, Happy Hollydays and/or Christmass
David