I am planning on using M24LR with 13.56MHz as my tag.
How do I design a low power amplifier circuit for increasing the reading distance of NFC?
- Thread starter sri_karthik
- Start date
Welcome to AAC.
An amplifier will not functionally increase the working distance, and has the potential to cause trouble. Consider using a UHF tag instead of the HF tag. The UHF systems are designed for greater distances and include collision detection to make that possible.
An amplifier will not functionally increase the working distance, and has the potential to cause trouble. Consider using a UHF tag instead of the HF tag. The UHF systems are designed for greater distances and include collision detection to make that possible.
You May Also Like
-
Synopsys Claims Industry’s First PCI Express 7.0 IP Set
by Aaron Carman
-
Gordon Bell, the Master Architect of Personal Computers, Dies at 89
by Duane Benson
-
Phison Carves Out New SSD Brand Along With Inaugural Series
by Aaron Carman
-
R&S Isolated Probe Tackles Switching Challenges of Complex Signal Types
by Jake Hertz
