Hello, can somebody help me how to make a fm modulated signal circuit in simetrix /simplis simulation
Hi Audioguru, do you see i ltspice you have a component am fm modulation, here i dont have, i have to select frequency modualtion index and some other frequencyYou will not see the tiny amount of FM modulation in a simulation or on an oscilloscope.
The maximum North American frequency deviation is only 75kHz which is less than 1 millionth of the 100MHz radio frequency.
BUT how to do it, i gonna make amplifierYou will not see the tiny amount of FM modulation in a simulation or on an oscilloscope.
The maximum North American frequency deviation is only 75kHz which is less than 1 millionth of the 100MHz radio frequency.
is for my self, i dont go in school, please audioguruI do not know what you are doing, and I do not know why you are doing it.
If it is for school work then ask your teacher to teach you how to do it.
is for fm receiverI do not know what you are doing, and I do not know why you are doing it.
If it is for school work then ask your teacher to teach you how to do it.
I make if amplifer and local oscillator and i need to make rf amplifier, demudulation stage, and some tuned circuit,I do not know anything about the SIEMTRIX simulation program and I do not know why you are trying to simulate an FM receiver circuit on it.
Thank you a lottttttttttttttttttUnfortunately I could not get a good picture in SIMetrix. I have little experience in using SIMetrix. In LTspice it turned out all by itself.
Thanks a lot!!! Was looking for that ltpsice one from many days, finally found exactly what I was looking for
by Duane Benson
by Jake Hertz
by Aaron Carman
by Jake Hertz