help with led digital project

Status
Not open for further replies.

beenthere

Joined Apr 20, 2004
15,819
It is a safety modification and does not replace the original lighting. However, the concern is that a failure due to a wiring fault could take out the electrical system and affect the other lights. So it gets into part 2 -
2. Any homemade wiring modifications to signal or head lighting, or penetrations through the fiewall are not for discussion. The lighting function is to too critical for non-approved wiring and connectors. Many safety issues are involved. Preventing chafing in wires passing through driver-made holes is impossible to guarantee.
 
Status
Not open for further replies.
Top