Hi folks
I'm trying to create a voltage increase circuit using the 741 op amp in a non inverted configuration. This is the first curcuit I've ever made so I'm a complete novice...
So, I've got a small question. When I hook the op amp up to the supply, using a 12v dc computer supply with the GND/-12v?? connected to pin 4 and the +12v to pin 6 the volatage going in to pin 6 is 12.15V. However there is an output voltage on pin 6 of 11.53. Is this the correct characteristics of the opamp? How would I make the output 0, so that only the voltage I'm trying to increase is on the output?
I'm trying to create a voltage increase circuit using the 741 op amp in a non inverted configuration. This is the first curcuit I've ever made so I'm a complete novice...
So, I've got a small question. When I hook the op amp up to the supply, using a 12v dc computer supply with the GND/-12v?? connected to pin 4 and the +12v to pin 6 the volatage going in to pin 6 is 12.15V. However there is an output voltage on pin 6 of 11.53. Is this the correct characteristics of the opamp? How would I make the output 0, so that only the voltage I'm trying to increase is on the output?