'Sup? I'm a bit confused with when the boost regulator turns on and off in the MAX5092B. On page 12 of the datasheet, it gives a description of operation. The third paragraph down says that the boost regulator turns off when (Vbsout-Vout) exceeds 2.5V and then Vbsout equals Vin. Then it says that the boost converter turns on when (Vbsout-Vout) is less than 2V. So at what Vin does the boost converter turn off and on? Vout is set to 5V and Vbsout is set to 7V for the 5092B. Hence, (Vbsout-Vout)=(7V-5V) always equals 2V. What's going on?