Hello, as a newbie i did search through the forum and did not find anything useful in soling my problem.
I have a old am/fm cassette radio in my old camper and it does not have a
Aux input. I need to be able to plug a mp3 player or cell phone into it when
we use it. I soldered a cable to where the tape head went of the board however even turning the player as low as it can go it is still driving it way to hard, it is very distorted my thought was to but a resistor on the end of each leg on the right and left input. Is this a good way to do it? and if not wha is a simple cheap way? my thought was 1/8watt 10kohm resistors.
Any input would be awesome.
Thank you all for reading.
Ron
I have a old am/fm cassette radio in my old camper and it does not have a
Aux input. I need to be able to plug a mp3 player or cell phone into it when
we use it. I soldered a cable to where the tape head went of the board however even turning the player as low as it can go it is still driving it way to hard, it is very distorted my thought was to but a resistor on the end of each leg on the right and left input. Is this a good way to do it? and if not wha is a simple cheap way? my thought was 1/8watt 10kohm resistors.
Any input would be awesome.
Thank you all for reading.
Ron