This question is probably (and hopefully) very simple to answer for someone out there. I'm using a relay boards to control 10 solenoids (24VDC 40Watts Each). I have two power sources: a 12VDC 800 mA for the relay board and 1 24 VDC 400 mA for all of the solenoids. My problem is that the 24Volt adapter keeps dying. What should I do? Should I power the solenoids with two or more of these adapters? or should I get a 24 VDC adapter with higher Amps?
thanks in advance for any help.
Sred
thanks in advance for any help.
Sred