Hello All
Thank you for taking a look.
I thought zener diodes only clamped voltage on their cathode side, to their breakdown voltage. In the schematic below, why is the anode side clamped to 12 volts to make the gate of the mosfets 24-12V = 12V (-12V gate to source)? (D4 or D5).
Thank you for your time!
Thank you for taking a look.
I thought zener diodes only clamped voltage on their cathode side, to their breakdown voltage. In the schematic below, why is the anode side clamped to 12 volts to make the gate of the mosfets 24-12V = 12V (-12V gate to source)? (D4 or D5).
Thank you for your time!
Attachments
-
78.2 KB Views: 4