I built a circuit using the Seiko precision voltage detector p/n S80830CLA432, cmos version. The voltage detector reliably turns a mosfet on at 3.1v and off at 3.0v. However, I want to increase the hysteresis to at least .5 - 1 volt range. Already tried what I thought might work, so I'm turning to this forum for suggestions. Thanks in advance.
http://datasheet.sii-ic.com/en/voltage_detector/S808xxC_E.pdf
http://datasheet.sii-ic.com/en/voltage_detector/S808xxC_E.pdf
Last edited: